• Half Arm - Small Waterproof Cast Cover

    Dry Pro / Dry Corp

  • $35.95

  • Description

    This cast cover is completely watertight, keeping your bandages,
    prosthetics, and casts dry. It is the only leg and arm cast protection
    in the world with the patented vacuum seal to keep your bandage or
    cast dry. It is so completely and totally waterproof, between the
    waterproof fabric and the vacuum seal, that you can even dive off a
    diving board, ride the ocean waves,or scuba dive and still have your
    cast stay completely dry. Arm and Leg Cast Covers are designed to fit
    snugly, especially the opening at the end of the cast cover where the
    arm and leg cast covers must remain sealed. To create a good vacuum
    seal the opening for your specific cast cover needs to be smaller than
    your limb.  
    
    ARM : 1. Measure from the tip of the middle finger to the top end of
    the cast or prosthetic. If the cast goes above the elbow, follow the
    bend of the arm. If the cast is close to the elbow then measure to
    the mid bicep. Don't worry if the waterproof cast cover is too long.
    The excess material of the cast sock will flatten down when the air is
    pumped out. Measure on the skin above the cast, not on the cast
    itself. Make sure that the cast cover is at least 2 inches longer
    than the cast. 2. Measure the circumference of the arm just above the
    cast or bandage (If the end of the cast is very close to the elbow,
    measure mid bicep.)

Share this product