• Full Leg - Large Waterproof Cast Cover

    Dry Pro / Dry Corp

  • $40.95

  • Description

    This cast cover is completely watertight, keeping your bandages,
    prosthetics, and casts dry. It is the only leg and arm cast protection
    in the world with the patented vacuum seal to keep your bandage or
    cast dry. It is so completely and totally waterproof, between the
    waterproof fabric and the vacuum seal, that you can even dive off a
    diving board, ride the ocean waves,or scuba dive and still have your
    cast stay completely dry. Arm and Leg Cast Covers are designed to fit
    snugly, especially the opening at the end of the cast cover where the
    arm and leg cast covers must remain sealed. To create a good vacuum
    seal the opening for your specific cast cover needs to be smaller than
    your limb.  
     LEG : Measure from the back of the heel (from the floor) to the top
    end of the cast or prosthetic. If the cast ends close to the knee you
    will need to measure up to the mid thigh. Don't worry if the
    waterproof cast cover is too long. The excess material of the cast
    sock will flatten down when the air is pumped out. Measure on the
    skin above the cast, not on the cast itself. Make sure that the cast
    cover is at least 2 inches longer than the cast. 2. Measure the
    circumference of the leg just above the cast or bandage (If the end of
    the cast is very close to the knee, measure mid thigh.)
    Notes: Do not leave the cast cover on for extended periods of time. We
    recommend removing it after every 45 minutes of use. Do not use in
    vascular compromised patients. Steady yourself in wet slippery areas.
    Always follow your doctor's advice.

Share this product